There are many reasons that may lead you to change the faucet in your bathtub. Is your sanitary equipment showing signs of water leakage? Is it just a desire to renew the faucet, which was installed a long time ago? No matter what the patterns, you can do the work yourself. You can also seek professional help. Whichever option you choose, here’s how to change your bathtub faucet.
Disassembly of the bathtub faucet
The most complex step in changing the faucet in a bathtub is accessing the various fixings on the faucet. It is used to unscrew the bathtub. However, the whole operation takes place in many stages. First, you must disconnect all the inlet piping from the faucet. To do this, you will need to loosen the main hot and cold water connections.
Take care of the stem as well as the bung, also loosening them to be able to easily remove the faucet. Then, at the bottom of the latter, unscrew the locknuts on the other side of the tub. Finally, carefully remove the faucet to be changed. However, you should remove the gasket and be sure to clean the bracket before considering installing a new faucet. Now that the used faucet is removed, you need to choose another accessory.
Several selection criteria are taken into account to acquire the new sanitary accessory. Be sure to combine the economic criterion with that of quality. In addition, do not rely solely on aesthetic reasons let alone cost. A high price does not always guarantee top quality.
Replacing the bathtub faucet
That’s it ! You have successfully removed the old faucet and now it’s time to install the new model. This step is not complex, but you will have to make sure you install the various accessories correctly. Do not forget about the gaskets to ensure that the plumbing is watertight. However, there are several important steps to replacing the bathtub faucet.
First, you have to start fitting the new accessory. Then you have to start screwing in the water inlet hoses. At this point, do not forget to put the seal in its place. The role of the latter is to seal the installation to prevent water leaks. Then also properly tighten the threaded rods.
Now you need to put the faucet on the tub, making sure to use a second gasket. Then, it will be necessary to place the stabilizer plate then to screw again the connections previously loosened during the dismantling of the valve. The final step will be to adjust the rod and bung for a final adjustment. All is finished! Your new faucet is installed and fully functional. You can now take a seat in your tub and test your new device. Also, if you don’t feel like a handyman, that’s okay! In this case, you might as well call a professional to change your bathtub faucet.
Ultimately, changing the bathtub faucet takes place in several steps that you can perform at home. However, if you do not have the right equipment, invite a professional to help you.